メインコンテンツにスキップ

Sostituzione gruppo cavo pulsante di accensione iPhone 6

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
イタリア語

手順 6を翻訳中

手順6
iPhone 6 Power Button Cable Assembly Replacement: 手順 0、 1の画像 1
  • If any of the adhesive strips broke off and the battery remains stuck to the rear case, prepare an iOpener or use a hair dryer to heat the rear case directly behind the battery.

Se una delle strisce adesive si è rotta e la batteria è rimasta attaccata al case posteriore, prepara un iOpener oppure usa un asciugacapelli per riscaldare il case posteriore nell'area retrostante la batteria.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります