メインコンテンツにスキップ

iPhone 15 Pro Max 后盖玻璃替换

ご注意:あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

英語
中国語

手順 1を翻訳中

手順1
iPhone 15 Pro Max Back Glass Replacement, Secure the screen: 手順 0、 3の画像 1 iPhone 15 Pro Max Back Glass Replacement, Secure the screen: 手順 0、 3の画像 2 iPhone 15 Pro Max Back Glass Replacement, Secure the screen: 手順 0、 3の画像 3
Secure the screen
  • The next four steps demonstrate the Anti-Clamp, a tool we designed to make the opening procedure easier. If you aren't using the Anti-Clamp, skip down four steps for an alternate method.

  • For complete instructions on how to use the Anti-Clamp, check out this guide.

  • The Anti-Clamp applies suction to both the screen and the back glass. To open only the back glass, you need to secure the screen with tape. You can also check out the full instructions on how to use this tape.

  • Cut two strips of tape, apply them along the long edges of the phone, and fold them over the screen to secure it.

下面的四个步骤演示的是使用我们的「反向钳」打开屏幕或玻璃的方法。使用反向钳能让这个过程更轻松一点。如果你没有反向钳,请跳过下方的四个步骤,查看「其他方式」。

要查看完整的反向钳使用说明,请点击这里

反向钳给正反面玻璃同时施加吸力,如果你只想打开背面玻璃,就要用胶带把正面屏幕固定住。点击此处查看完整的胶带使用教程。

剪两条胶带,分别把它们贴在手机的两侧,折到屏幕上粘住屏幕。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります