I have had issues with my ~2 year old Quadcast S for a bit now, nothing that prevented it for working though. For the past week the microphone had an error show up when plugged in, nothing I couldn't fix, I uninstalled the "unrecognized device" from Device Manager, reinstalled USB Composite Devices and it always started working. Today, the Quadcast S isn't even showing up in Device Manager.
Things I've tried:

• Reinstalling Everything USB Related in the Device Manager (showing hidden devices)
• Reinstalling Everything Audio Related in the Device Manager
• Every other USB Port
• Testing the original cable on another device (can charge and transmit data)
• Using a USB-C to USB-C cable
• Heating it up (as suggested on Reddit by another User with the same issue)
• Changing Power Settings

Other Notes:

• The Device isn't showing up in Device Manager
• The RGB Lights aren't on
• There is no connection sound made by Windows when plugged in
• There is no pop-up by Windows when plugged in
• I use NVIDIA Broadcast
• All the drivers are up to date

It's as if the microphone doesn't exist. Help is appreciated, thanks!

I am attempting to help a relative reset there Apple ID password to give away there old phone and she does not remember the password but it always attempts to send the password reset code via email which is useless without having the ability to log into the email (it is an @icloud email) so we are stuck. I don’t really know what to do at this point.

Flashing E2 & F2 codes. Won't start? What's up?

Tried turning power off for 1 minute & pushing 2 different buttons a total of 10 times. Nothing works. Unit is a little over 1 year old.

Whirlpool WRF560SEYM00
Could anyone tell me what parts I need to replace? I thought the door cam but there’s nothing for it to stay in place inside the door.. my daughter was having a fit & swung the door open.. thanks in advance!

@kamranazam if the lines are up and down then those are vertical lines. Common issue is the main board as well as the ribbon cables (there is always a chance of a bad panel as well). Remove the cables and check for tears as well as corroded ends. If the cables are good, then consider replacing the main board. This "after 15 to 20 minutes start disappearing" is possibly due to solder joints closing and making contact. Check your board for cold solder joints. You identify those by the color of the joint. It should be shiny silver, if it is dull grey, resolder it.

Let's see what those lines look like. Post an image of what your screen shows as well as your boards. that way we can see what you see. iFixitでの質問に画像を追加する方法

@kamranazam you need to check on your driver boards. Those are the boards that connect to the LCD. Those can also cause differences in color and vibrancy. The washed out display is commonly caused by issues with the Gamma IC.

Sometimes when I take my watch off the charger and go to unlock it, the display looks distorted in the way that it turns green and its also pink sometimes. I think it may be a loose connection but I dont want to open it up and i would prefer to fix it on my own rather than at apple. I want to narrow down the issue before I open it up.

Pourquoi le CD ne s'insère-t-il pas dans la PS4 ?

I bought my Macbook Air in September of 2011 new from the Apple store. My trackpad was replaced by Apple in September of 2012 as it gradually began to become unresponsive. Since the repair, I haven't experienced any other problems. The unresponsive trackpad was the only problem I've run into with this Mac.

After some brief surfing around this morning, I went to work with my MacBook running fine as usual. After coming home, my keyboard and trackpad are both unresponsive. What's a bit more unsettling is that, in the System Preferences, it's not even recognizing a trackpad as being connected.

After doing some searching around, I've found that some people ran into this issue with MacBook Pros, and it was because of a ribbon that had become loose underneath the battery. I'm wondering if it's possibly the same problem for me with my MacBook Air. I hadn't read about anyone with an Air experiencing the same problem.

Any help would be appreciated.I would love to get my Air working so I don't have to constantly use my external keyboard/mouse.

Thanks!

Edit: The only key that works on the keyboard is the power button.

bonjour'tte les étapes pour installer MacOS High Sierra ont bien marche jusqu'à la 6ème dosk effacé mais ne veut pas charger dessus