注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての39個のガイドに反映されます。
手順 2を翻訳中
手順2
-
Use the edge of a plastic opening tool to peel the digitizer cable off the shields on the logic board.
-
Carefully pull the digitizer cable off the adhesive securing it to the side of the rear case.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。