メインコンテンツにスキップ

iPhone 15 バックガラスにリバースクランプを使用する方法

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 1を翻訳中

手順1
iPhone 15 Back Glass Anti-Clamp Instructions, Secure the screen: 手順 0、 3の画像 1 iPhone 15 Back Glass Anti-Clamp Instructions, Secure the screen: 手順 0、 3の画像 2 iPhone 15 Back Glass Anti-Clamp Instructions, Secure the screen: 手順 0、 3の画像 3
Secure the screen
  • The next four steps demonstrate the Anti-Clamp, a tool we designed to make the opening procedure easier. If you aren't using the Anti-Clamp, skip down four steps for an alternate method.

  • For complete instructions on how to use the Anti-Clamp, check out this guide.

  • The Anti-Clamp applies suction to both the screen and the back glass. To open only the back glass, you need to secure the screen with tape. You can also check out the full instructions on how to use this tape.

  • Cut two strips of tape, apply them along the long edges of the phone, and fold them over the screen to secure it.

次の4つの手順では、リバースクランプのデモンストレーションを行います。クランプは、オープニング手順をより簡単にするために私たちが考案したツールです。クランプを使用しない場合は、4つ下の手順をスキップして別の方法を試してください。

クランプの使用方法については、こちらのガイドをご覧ください。

クランプはスクリーンとバックガラスの両方に吸引力を与えます。背面ガラスだけを開けるには、スクリーンをテープで固定する必要があります。このテープの詳しい使い方もご覧ください。

テープを2本切り、デバイスの長辺側に沿って貼り、スクリーンの上に折り返して固定します。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります