メインコンテンツにスキップ

Reemplazo de pantalla de iPhone 15

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
スペイン語

手順 3を翻訳中

手順3
iPhone 15 Screen Replacement, Create a gap under the screen: 手順 0、 3の画像 1 iPhone 15 Screen Replacement, Create a gap under the screen: 手順 0、 3の画像 2 iPhone 15 Screen Replacement, Create a gap under the screen: 手順 0、 3の画像 3
Create a gap under the screen
  • Pull the blue handle forward to lock the arms.

  • Turn the handle one full turn (360 degrees) or until the cups start to stretch.

  • As the cups stretch, make sure they stay vertically aligned with each other. If they tend to slip, remove the Anti-Clamp and apply tape for the cups to stick to.

  • If you don't have tape, you may use your hands to clean the suction cups and warm them up to help them stick.

Jala el mango azul hacia adelanta para bloquear los brazos.

Dale un giro completo al mango (360 grados) o hasta que la ventosa empiece a estirarse.

Conforme la ventosa se estire, asegúrate que queden alineadas de forma vertical entre sí. Si tienden a resbalarse retira el Anti-Clamp y aplica cinta para que las ventosas se peguen.

Si no tienes cinta, puedes usar tus manos para limpiar las ventosas de succión y calentarlas para ayudar a que se peguen.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります