メインコンテンツにスキップ

iPhone 12 Pro Max イヤピーススピーカーとフロントセンサーアセンブリの交換

注意:あなたはさきほど閲覧していたガイドの前提条件を編集しています。あなたが行った変更は、この手順を含む個のガイド全体に影響を与えます。

英語
日本語

手順 1を翻訳中

手順1
iPhone 12 Pro Max Earpiece Speaker and Front Sensor Assembly Replacement, Unscrew the speaker/sensor assembly: 手順 0、 1の画像 1
Unscrew the speaker/sensor assembly
  • Remove the four screws securing the speaker/sensor assembly to the back of the display.

  • Two 1.3 mm Phillips screws

  • One 1.8 mm shouldered Y000 screw

  • One 1.1 mm Y000 screw

ディスプレイ裏面にスピーカー/センサーアセンブリを固定している次の4本のネジを外します。

1.3 mm プラスネジー2本

1.8 mm 肩ツキY000ネジー1本

1.1 mm Y000ネジ−1本

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります