メインコンテンツにスキップ

Huawei Mate 30 Proの分解

英語
日本語

手順 11を翻訳中

手順11
Huawei Mate 30 Pro Teardown: 手順 0、 2の画像 1 Huawei Mate 30 Pro Teardown: 手順 0、 2の画像 2
  • Next we dig out the structure-borne speaker driver, previously seen in the P30 Pro teardown.

  • This little thing vibrates the display to create sound—replacing the traditional earpiece speaker we see in other phones. It's a nifty trick, but not without some downsides: it's an additional component to replace with the display, and if you crack your screen around the driver, you'll likely see a drop in sound fidelity.

  • Aaand what do we have here? It looks like the tiny circular LRA vibration motor from Mates past has been upgraded to a rectangular taptic engine-style buzzer.

次に取り出すのは構造媒介のスピーカードライバーで、P30 Proの分解でもありました。

この小さなドライバーがディスプレイを振動させて、サウンドを生成します。他機種のスマートフォンにも搭載されており、一般的なイヤピーススピーカーに代わるものです。素晴らしい技法ですが、同時にマイナス面もあります。これは、ディスプレイに代わる追加コンポーネントであり、ドライバー周辺のスクリーンにダメージが入った場合、高忠実サウンドのクオリティが低下する可能性があります。

そして、ここにあるものは?Mateの旧モデルに搭載されていた小さな円盤形のLRA振動モーターが、長方形のハプティック(触覚)エンジンスタイルのブザーへと改良されました。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります