メインコンテンツにスキップ

Samsung Galaxy Foldの分解

英語
日本語

手順 7を翻訳中

手順7
Samsung Galaxy Fold Teardown: 手順 0、 3の画像 1 Samsung Galaxy Fold Teardown: 手順 0、 3の画像 2 Samsung Galaxy Fold Teardown: 手順 0、 3の画像 3
  • Hey look, there's a phone attached to this phone! We set about opening this phone's second half, where a comparatively tiny notification screen is flanked by some seriously massive bezels.

  • This non-folding front screen comes off with a little heat and fairly little drama, for a Samsung.

  • It's helped by the flat edges and big bezels—which despite looking kinda funky, actually leaves ample room to pry without stabbing the delicate OLED panel in the process.

  • Flipping the display over reveals the OLED panel is made by Samsung, to the surprise of no one.

  • Along for the ride is Samsung's own S6SY761X touch controller, last seen in pretty much every Samsung teardown.

  • Winbond W25Q80EW 4 Mb serial flash memory

ほら見てください!このスマホに付いてるものは、もう一つ別のスマホです!反対側を開口します。こちら側には、とてつもなく大きなベゼルの側に、比較的小さな通知用画面が表示されます。

この折りたためないフロントスクリーンにわずかな熱を当てれば、簡単に開きます。意外にもSamsungにしては。

平らなエッジに大きなベゼルは幾分変わって見えますが、実際にはデリケートなOLEDパネルとの間に十分なスペースを残しているため、こじ開ける際にアクシデントでダメージを与えてしまうことがありません。

ディスプレイを開けて、OLEDパネルを確認すると誰も驚きはしませんが、Samsung製です。

このパネルにはSamsungのS6SY761Xタッチコントローラーが搭載されています。Samsungの分解ではお馴染みのチップです。

Winbond W25Q80EW 4Mb シリアルフラッシュメモリ

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります