メインコンテンツにスキップ

iPhone X のバッテリーの交換

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての15個のガイドに反映されます。

英語
日本語

手順 5を翻訳中

手順5
iPhone X Battery Replacement: 手順 0、 3の画像 1 iPhone X Battery Replacement: 手順 0、 3の画像 2 iPhone X Battery Replacement: 手順 0、 3の画像 3
  • Grab one of the outer battery adhesive tabs and slowly pull it away from the battery, toward the bottom of the iPhone.

  • Pull steadily, maintaining constant tension on the strip until it slips out from between the battery and the rear case.

  • The strip will stretch to many times its original length. Continue pulling and re-grab the strip near the battery if necessary.

  • If the battery adhesive tabs break during the removal process, use your fingers or blunt tweezers to retrieve the remaining length of adhesive, and continue pulling.

  • If any of the adhesive strips break underneath the battery and cannot be retrieved, try to remove the remaining strips, and then proceed as instructed below.

接着ストリップの3本のうち、外側のどちらかを掴み、ゆっくりとバッテリーからiPhoneの下側に向けて引っ張ります。

同じ強さでゆっくりと丁寧に引っ張ります。バッテリーとリアケースの間からストリップが抜け出るまで作業を続けてください。

ストリップは本来の長さから何倍にも伸びます。必要に応じてバッテリー付近で持ち手を替えてください。

作業中、ストリップが切断してしまったら、指や先の丸いピンセットを使って残りの部分を取り出して掴み、続けて引っ張ります。

バッテリーの下でいずれかの接着ストリップが切断してしまい、取り出せない場合は、残りの接着ストリップの作業を続行してください。それから下のインストラクションに従ってください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります