メインコンテンツにスキップ

DJI Mavic Pro Top Case Removal

英語
日本語

手順 5を翻訳中

手順5
DJI Mavic Pro Top Case Removal, Remove the Screws Under the Front Arm Covers: 手順 0、 1の画像 1
Remove the Screws Under the Front Arm Covers
  • There are two 1.5mm hex screws, these are 5.8mm long, with a 2mm diameter. These are thicker than the screws holding the covers down, because those screws are only holding the covers down, while the screws under it are holding the top cover down. Take note of this during reassembly.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります