I need a part number or a link to the proper RJ45 modular connector. my device is a unifi protect g4 dome model number...

I own a repair shop I have a 21.5 inch late 2012 iMac is running so slow it times out installation of OS, and is jumpy...

iPad Pro 11" Not charging after screen replacement. I replaced the screen and now the device only pulls around 0.1-0.2...

Unplug it, open it, and let it dry for a few days. After dry, clean any corrosion with isopropyl alcohol and a tooth brush, let that dry then reassemble and try it.

If the charging port has a cord broken off in it you may be able to take it to a local repair shop and have them remove the debris for a small fee, or carefully try and use eyebrow tweezers yourself. If the charging port itself is broken you will need to micro solder a in a new charging port, you need specialized tools and the repair can sometimes be quite expensive that tablet is valued around 200$ refurbished so don’t pay more than that for a repair I would say.

When the system info window says service battery that means you need a new battery. If you recently replaced the battery then there is a high likelihood that is a bad battery. Replace the battery and reset the SMC. If the computer still does not wake up adjust the energy saver settings. Update (03/01/2021): High likelihood that the battery is the culprit. We run into bad MacBook batteries all the time try and purchase a battery from iFixit they have a really good return policy if the part is faulty.

I think the original problem was a bad HDD was causing a similar issue as the lagging and jumpiness, but after I installed the SSD I never reinstalled the LCD I only tested without it, so it seemed like it was the same issue but it was a sensor not plugged in.