メインコンテンツにスキップ

Samsung Galaxy S8のスクリーンの交換

英語
日本語

手順 9を翻訳中

手順9
Samsung Galaxy S8 Screen Replacement: 手順 0、 1の画像 1
  • Follow this link for a detailed screen adhesive application guide.

  • Before installing a new display, it's very important to remove all traces of the old adhesive from the frame, while taking special care to remove any small glass fragments.

  • After removing all traces of glue and glass from the frame, clean the adhesion areas with 90% (or higher) isopropyl alcohol and a lint-free cloth or coffee filter. Swipe in one direction only, not back and forth.

  • If the frame is bent, or if any glue or glass remnants are left behind, the new display will not mount correctly and may be damaged. If necessary, replace the frame.

  • The best way to secure the new screen is with a sheet of custom-cut double-sided tape. Apply the tape to the back of the screen, then carefully feed the display cable through the frame. Align the screen and press it into place.

詳細なスクリーン接着剤塗布ガイドは、このリンク先を参照してください

新しいディスプレイを装着する前に、必ずフレームから残りの接着剤を綺麗に取り除いてください。特にひび割れの場合は小さなガラスの破片を完全に取り除いてください。

フレームから接着剤とガラスを綺麗に取り除いた後、装着エリアに90%以上のイソプロピルアルコールとリントフリーの布またはコーヒーフィルターで拭き取ってください。前後に拭くのではなく、同じ方向に向けて動かします。

フレームが曲がっていたり接着剤やガラスが残っている場合、新しい交換用ディスプレイが正しく装着できず、ダメージを与えてしまいます。必要に応じてフレームを交換してください。

新しいスクリーンを装着する一番良い方法はカスタムカットされた両面テープを使用することです。テープをスクリーン裏側に付けてから、ゆっくりとフレームにディスプレイケーブルを繋げます。スクリーンを定位置に載せてしっかりと押し込みます。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります