メインコンテンツにスキップ

MacBook Air (Modelle A1237 und A1304) Gleichspannungs-Versorgungsplatine tauschen

英語
ドイツ語

手順 2を翻訳中

手順2
MacBook Air Models A1237 and A1304 DC-In Board Replacement: 手順 0、 2の画像 1 MacBook Air Models A1237 and A1304 DC-In Board Replacement: 手順 0、 2の画像 2
  • Lift the display data cable slightly for enough clearance to remove the two Phillips screws securing the DC-In board to the upper case.

  • Lift the DC-In board slightly and pull its connector straight away from the socket on the logic board.

Hebe das Displaydatenkabel leicht an, so dass du an die beiden Kreuzschlitzschrauben, mit denen die Gleichspannungs-Versorgungsplatine befestigt ist, herankommst und abschrauben kannst.

Hebe die Gleichspannungs-Versorgungsplatine ein wenig an und ziehe ihren Stecker gerade aus dem Anschluss auf dem Logic Board heraus.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります