注意:あなたはさきほど閲覧していたガイドの前提条件を編集しています。あなたが行った変更は、この手順を含む個のガイド全体に影響を与えます。
手順 2を翻訳中
手順2
-
Now you can carefully lift the DSP board to access the flex cable connector underneath.
-
Disconnect the flex cable by using a spudger and remove the DSP board.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。