メインコンテンツにスキップ

iPad Air セルラーモデルのロジックボードの交換

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
日本語

手順 14を翻訳中

手順14
iPad Air LTE Logic Board Replacement: 手順 0、 3の画像 1 iPad Air LTE Logic Board Replacement: 手順 0、 3の画像 2 iPad Air LTE Logic Board Replacement: 手順 0、 3の画像 3
  • Disconnect the left and right Wi-Fi antenna cables by lifting them straight up from their sockets on the lower end of the logic board.

  • These sockets are fairly delicate. Be careful to apply pressure straight up so you don't shear the socket off the board.

左と右側のWi-Fiアンテナケーブルをロジッロジックボード下部端のソケットからまっすぐに引き上げて、接続を外します。

これらのソケットはとても壊れやすいです。加える力をまっすぐに引き上げてください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります