メインコンテンツにスキップ

iPad Air セルラーモデルのロジックボードの交換

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
日本語

手順 15を翻訳中

手順15
iPad Air LTE Logic Board Replacement: 手順 0、 3の画像 1 iPad Air LTE Logic Board Replacement: 手順 0、 3の画像 2 iPad Air LTE Logic Board Replacement: 手順 0、 3の画像 3
  • Use a pair of tweezers to peel up the tape securing the right Wi-Fi antenna cable near the SIM board.

  • Peel carefully and pull up on the tape only—not the antenna cable, which will rip easily.

  • It may be helpful to fold the SIM board cable back slightly to better access the tape—but be careful not to damage the SIM board cable. If you need more clearance, remove the SIM board.

ピンセットの先端を使って、SIMボード付近のWi-Fiアンテナケーブル右側を留めているテープを取り除きます。

テープのみを取り除いてください。裂けやすくなっているアンテナケーブルには接触しないでください。

テープにアクセスしやすいように、SIMボードケーブルを僅かに後側に曲げると便利です。しかし。SIMボードケーブルにダメージを与えないようにご注意ください。もしくは、作業をよりしやすくするには、SIMボードを取り出しましょう。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります