/
私のワークベンチ

お持ちのデバイス用の修理ガイドとパーツ一覧とアンサーフォーラムにアクセスする。

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
参加する
ログイン

Remplacement de la nappe des composants supérieurs de l'iPhone 6s

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての3個のガイドに反映されます。

ガイドに戻る
英語
フランス語
前の手順

手順 14を翻訳中

手順14
iPhone 6s Upper Component Cable Replacement: 手順 0、 3の画像 1 iPhone 6s Upper Component Cable Replacement: 手順 0、 3の画像 2 iPhone 6s Upper Component Cable Replacement: 手順 0、 3の画像 3

  • If your replacement part did not come with the mute switch cover, you will need to remove the switch cover and transfer It.

  • Use the flat end of the spudger to press down and hold the old bracket firmly in place.

  • Use tweezers or your fingers to carefully rock the switch cover such that the switch cover pins swing out of their clips.

  • Lift the switch cover straight up.

  • To install the mute switch cover onto the new upper cable assembly, reverse the steps.

  • The pins are supposed to rest near the clip opening. Do no attempt to force the pins far into the clips. The switch cover will be held securely in place once you screw the bracket back onto the case.

  • The switch cover goes on in only one orientation. If you are having a hard time getting the switch cover onto the new part, try toggling the switch so that the black protruding lever is in a different position.

  • Before reassembling the phone, check all switches and buttons to see if they physically work.

Si la pièce de rechange n'inclut pas le cache du commutateur silencieux, il va falloir retirer et transférer cette pièce.

Utilisez l'extrémité plate d'une spatule pour appuyer sur l'ancien support afin de le maintenir fermement en place.

Utilisez ensuite une pincette ou vos doigts pour faire bouger doucement le cache de façon à ce que les broches du cache s'enlèvent de leurs attaches.

Retirez le cache en le soulevant tout droit.

Pour installer le cache de l'interrupteur silencieux sur votre nouvelle pièce, inversez les étapes.

The pins are supposed to rest near the clip opening. Do no attempt to force the pins far into the clips. The switch cover will be held securely in place once you screw the bracket back onto the case.

The switch cover goes on in only one orientation. If you are having a hard time getting the switch cover onto the new part, try toggling the switch so that the black protruding lever is in a different position.

Before reassembling the phone, check all switches and buttons to see if they physically work.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。