メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての16個のガイドに反映されます。

英語
イタリア語

手順 2を翻訳中

手順2
Gently lift each side of the battery connector to pry the connector out of its socket on the logic board. Bend the connector back toward the battery, ensuring that the battery connector doesn't accidentally make contact with the logic board. Bend the connector back toward the battery, ensuring that the battery connector doesn't accidentally make contact with the logic board.
  • Gently lift each side of the battery connector to pry the connector out of its socket on the logic board.

  • Bend the connector back toward the battery, ensuring that the battery connector doesn't accidentally make contact with the logic board.

Solleva con cautela ogni lato del connettore della batteria per staccare il connettore dal suo zoccolo sulla scheda logica.

Piega il connettore indietro verso la batteria, per evitare che possa fare contatto accidentalmente con la scheda logica.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります