メインコンテンツにスキップ

iPhone 初代のケースの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 3を翻訳中

手順3
iPhone 1st Generation Case Replacement: 手順 0、 1の画像 1
  • Start removing the rear panel on the side with the buttons.

  • Slide the dental pick completely into the square hole. You may need to wiggle the tool and apply a good amount of force to get it to go all the way.

ボタンのある側の背面パネルを取り外します。

爪楊枝を四角い穴にスライドして差し込みます。楊枝を左右小刻みに動かし、適度な力を加えて動かしてください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります