メインコンテンツにスキップ

MacBook Pro 13インチ Retina Display Late 2013 ロジックボードアセンブリの交換

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての4個のガイドに反映されます。

英語
日本語

手順 2を翻訳中

手順2
MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 手順 0、 2の画像 1 MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 手順 0、 2の画像 2
  • Use the flat end of a spudger to pop the I/O board connector straight up off its socket on the logic board.

  • Be careful to only pry up on the I/O board cable, not on the socket itself or you risk damaging your logic board.

スパッジャーの平面側先端を使って、出入力ボードコネクターをロジックボード上のソケットからまっすぐ持ち上げて接続を外します。

出入力ボードケーブルのみをこじ開けるようにご注意ください。ソケット自体には接触しないでください。ロジックボードにダメージを与えてしまう可能性があります。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります