メインコンテンツにスキップ

Procedura di apertura iPhone 12 mini

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての8個のガイドに反映されます。

英語
イタリア語

手順 15を翻訳中

手順15
iPhone 12 mini Opening Procedure, Open the iPhone: 手順 0、 3の画像 1 iPhone 12 mini Opening Procedure, Open the iPhone: 手順 0、 3の画像 2 iPhone 12 mini Opening Procedure, Open the iPhone: 手順 0、 3の画像 3
Open the iPhone
  • Rotate your iPhone so the right edge faces you.

  • Open the iPhone by swinging the display up from the right side, like the front cover of a book.

  • Don't try to fully separate the display yet, as several fragile ribbon cables still connect it to the iPhone's logic board.

  • Lean the display against something to keep it propped up while you're working on the phone.

  • During reassembly, lay the display in position, align the clips along the top edge, and carefully press the top edge into place before snapping the rest of the display down. If it doesn't click easily into place, check the condition of the clips around the perimeter of the display and make sure they aren't bent.

Ruota l'iPhone così che il bordo destro sia rivolto verso di te.

Apri l'iPhone sollevando e ruotando il bordo destro dello schermo come la copertina di un libro.

Non provare ancora a rimuovere del tutto lo schermo: diversi cavi a nastro delicati sono ancora collegati alla scheda madre del telefono.

Appoggia lo schermo a qualcosa in modo che resti aperto mentre lavori nel telefono.

Durante il rimontaggio, appoggia lo schermo in posizione, allinea i ganci lungo il bordo superiore e premilo attentamente in posizione prima di far aderire il resto dello schermo. Se non si fissa facilmente, controlla lo stato delle clip lungo il perimetro dello schermo e assicurati che non siano piegate.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります