メインコンテンツにスキップ

iMac Intel 21,5" Retina 4K Display 2019 Logic Board Einheit tauschen

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての3個のガイドに反映されます。

英語
ドイツ語

手順 13を翻訳中

手順13
iMac Intel 21.5" Retina 4K Display 2019 Logic Board Assembly Replacement: 手順 0、 3の画像 1 iMac Intel 21.5" Retina 4K Display 2019 Logic Board Assembly Replacement: 手順 0、 3の画像 2 iMac Intel 21.5" Retina 4K Display 2019 Logic Board Assembly Replacement: 手順 0、 3の画像 3
  • Use the tip of a spudger to flip open the retaining flap on the microphone ribbon cable ZIF socket.

  • Be sure you are prying up on the hinged retaining flap, not the socket itself.

  • Use tweezers to gently pull the microphone ribbon cable straight out of its socket.

Klappe mit dem flachen Ende des Spudgers den Sicherungsbügel am ZIF-Anschluss des Flachbandkabels zum Mikrofon hoch.

Achte darauf, dass du nur am Sicherungsbügel hebelst, nicht am Anschluss selbst.

Ziehe das Mikrofonkabel behutsam mit einer Pinzette gerade aus dem Anschluss heraus.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります