注意:あなたはさきほど閲覧していたガイドの前提条件を編集しています。あなたが行った変更は、この手順を含む個のガイド全体に影響を与えます。
手順 2を翻訳中
手順2
-
Remove the 5mm Phillips #00 screw.
-
Pull up on the black tab connected to the fan. This will pull it away from the cooling fins, allowing it to be removed.
-
Remove the fan from the laptop.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。