注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての4個のガイドに反映されます。
手順 2を翻訳中
手順2
-
Flip the keyboard over by pulling the top edge of the keyboard away from the netbook body, using the bottom edge as a hinge point.
-
Locate the opaque strip, or ribbon cable, connecting the back of the keyboard to the hardware of the netbook.
-
To disconnect the ribbon cable, use a plastic opening tool to pull each side of the black plastic strip, located below the ribbon cable, away from the ribbon cable.
-
The black strip will disconnect completely from the ribbon cable. The keyboard will then be detached from the netbook's body and can be safely removed.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。