手順 4を翻訳中
手順4
-
Use your prying tool or a spudger to flip up the FFC bail, the tiny black clamp shown here.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。
お持ちのデバイス用の修理ガイドとパーツ一覧とアンサーフォーラムにアクセスする。
Use your prying tool or a spudger to flip up the FFC bail, the tiny black clamp shown here.
If the cable doesn't move freely after the bail is up, make sure it's pushed all the way back, and lightly tug the cable away from its clamp.
Pull only parallel to the board, and only after the bail is up.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。
次の行
前の行
下に新しい行を挿入
上に新しい行を挿入
現在の行をインデントする
現在の行をインデント解除する
現在の行を削除する
次の手順に移動します。
前の手順に移動します。
ヘルプを開く