メインコンテンツにスキップ

DJI Mavic Pro Front Arm Assembly Replacement

手順 6を翻訳中

英語
日本語
手順6
DJI Mavic Pro Front Arm Assembly Replacement, Desolder the arm wires: 手順 0、 1の画像 1
Desolder the arm wires
  • Desolder the larger gray motor wire running to the arm to be replaced

  • Desolder the larger white motor wire

  • Desolder the larger black motor wire

  • Desolder the smaller black LED wire

  • Desolder the smaller white LED wire

  • The marked wires are for the right arm. The wires to desolder when replacing the left arm are the mirror image of the ones shown here.

  • Don't forget that plastic has a tendency to melt when exposed to heat! I may or may not have disregarded this fact and put a mark on my drone...

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります