/
私のワークベンチ

お持ちのデバイス用の修理ガイドとパーツ一覧とアンサーフォーラムにアクセスする。

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
参加する
ログイン
世界最大のリペアコミュニティに参加しましょう。
Patching a Bicycle Tire Inner Tube

Patching a Bicycle Tire Inner Tube

Brett Hartt

Brett Hartt とその他 5 人の作成者

最終更新日: June 4, 2019

見積もりなし
中レベル

はじめに

手順 1 に進む

You will be taking the wheel off of your bike, removing the tire from the wheel, and patching the hole.

Notes:

  • Make sure that the wheel is fully deflated throughout the process, except for finding the hole.
  • When applying the rubber cement to the hole the thinner the layer the better, for faster drying.

必要な工具と部品

ツール

これらのリンクを通じて購入すると、iFixit は手数料を得ます。

  1. Patching a Bicycle Tire Inner Tube, Inner Tube: 手順 1、 1の画像 1

    • Press the valve core while applying pressure to the tire to deflate the tire.

    翻訳

  2. Patching a Bicycle Tire Inner Tube: 手順 2、 2の画像 1 Patching a Bicycle Tire Inner Tube: 手順 2、 2の画像 2

    • Insert the flat part of a tire lever under the tire coping. Apply pressure to the other end of the lever to lift the tire up and out of the wheel.

    • Slide the lever around the circumference of the wheel to completely remove the tire.

    • Alternatively, if you have multiple tire levers, see if you can clip the first lever to a spoke to keep it in place. Then insert the second lever a few inches away. Clip it to a spoke. Insert the third lever a few more inches along. Take out the second lever and insert it it a few inches past the third. Work along the rim until the tire pops off.

    翻訳

  3. Patching a Bicycle Tire Inner Tube: 手順 3、 1の画像 1

    • Remove the tube by pushing the valve through the hole in the rim and pulling the tube out from under the tire.

    翻訳

  4. Patching a Bicycle Tire Inner Tube, Patching a Bicycle Tire Inner Tube: 手順 4、 2の画像 1 Patching a Bicycle Tire Inner Tube, Patching a Bicycle Tire Inner Tube: 手順 4、 2の画像 2

    • Locate the leak by first over inflating the tire.

    • Place the tire under water and look for bubbles to find the leak.

    翻訳

  6. Patching a Bicycle Tire Inner Tube: 手順 5、 1の画像 1

    • Mark the hole with a marker, and completely deflate the tire.

    翻訳

  7. Patching a Bicycle Tire Inner Tube: 手順 6、 1の画像 1

    • Select a patch kit that you will use to patch the hole. Try to pick a patch that is appropriate for the size of the hole.

    翻訳

  8. Patching a Bicycle Tire Inner Tube: 手順 7、 1の画像 1

    • Clean the area near the hole with soap and water, then dry it thoroughly.

    • Rough up the area around the hole with an abrasive surface such as sand paper until the area around the leak loses its shine.

    翻訳

  9. Patching a Bicycle Tire Inner Tube: 手順 8、 1の画像 1

    • Apply rubber cement to an area around the hole that is bigger than the patch to ensure that the patch bonds completely.

    翻訳

  10. Patching a Bicycle Tire Inner Tube: 手順 9、 1の画像 1

    • Apply the patch to the area.

    翻訳

  11. Patching a Bicycle Tire Inner Tube: 手順 10、 1の画像 1

    • Apply pressure to the patch until the rubber cement is dry.

    翻訳
終わりに

To reassemble your bike, follow these directions from step 6

2 の人々がこのガイドを完成させました。

作成者

5人の作成者と共同で作成されました。

Brett Hartt

メンバー登録日: 04/12/10

129,827 ポイント

143のガイドは作成済み

バッジ: 52

+49 個以上のバッジ

チーム

iFixit iFixit人のメンバー

Staff

118 メンバー

19,455のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 5

今までの合計 1,922