メインコンテンツにスキップ

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 2を翻訳中

手順2
Remove the Home Button bracket and peel up the tape connected to it. During reassembly, after installing the home button, you'll need to glue this bracket into place to secure it Scrape off as much of the old adhesive residue from the bracket as you can, then clean it with acetone or high-concentration (90% or greater) isopropyl alcohol.
  • Remove the Home Button bracket and peel up the tape connected to it.

  • During reassembly, after installing the home button, you'll need to glue this bracket into place to secure it

  • Scrape off as much of the old adhesive residue from the bracket as you can, then clean it with acetone or high-concentration (90% or greater) isopropyl alcohol.

  • Secure the bracket with hot-melt glue, superglue, or high-strength double-sided tape. Make sure the bracket is aligned correctly before allowing your adhesive to cure, or the home button will not click when pressed.

ホームボタンのブラケットを取り外し、接着されているテープをはがします。

[* black] Remove the Home Button bracket and peel up the tape connected to it.
[* icon_reminder] During reassembly, after installing the home button, you'll need to glue this bracket into place to secure it
[* black] Scrape off as much of the old adhesive residue from the bracket as you can, then clean it with acetone or high-concentration (90% or greater) isopropyl alcohol.
[* black] Secure the bracket with hot-melt glue, superglue, or [product|IF317-072|high-strength double-sided tape]. Make sure the bracket is aligned correctly before allowing your adhesive to cure, or the home button will not click when pressed.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります