手順 6を翻訳中
手順6
-
As the 6 series is slightly higher, we need to make a little space on the plastic holder which is beneath the card.
-
Remove the plastic part, which is shown on the 2nd picture, by removing one screw and carefully pull it from the aluminium case.
-
It's fastened with tape so don't worry about breaking anything.
-
After wiggling and navigating it around the cables, you should have it in your hands.
-
The rectangular space, in picture three where the large cable goes through, use a rotary tool to make it about 5mm wider and 2-3mm deeper.
-
The third image shows the final result we want to achieve.
-
The primary reason for this step is the heatpipe of the 6 series, which takes more space.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。