注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。
手順 1を翻訳中
手順1
-
To replace the motherboard you must remove the three silver 10 mm T-10 Torx screws labelled "C1," "C2," and "C6."
-
Remove the four black 8 mm T-8 Torx screws lablelled "A1," "A2," "A3," and "A4."
| [* red] To replace the motherboard you must remove the three silver 10 mm T-10 Torx screws labelled "C1," "C2," and "C6." | |
| - | [* orange] Remove the four black 8 mm T- |
| + | [* orange] Remove the four black 8 mm T-8 Torx screws lablelled "A1," "A2," "A3," and "A4." |
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。