注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての5個のガイドに反映されます。
手順 2を翻訳中
手順2
-
When the edges of the cover are free from adhesive, tilt it to allow access to the battery tabs.
-
Use tweezers to pull the two black adhesive strips out of the phone but don't pull just yet.
- | [* black] After the adhesive around the egdes is loosened, pull up the back cover with your suction handle. |
---|---|
- | [* black] Use a tweezer to pull out two black straps that are attached to two pieces of adhesive right on the battery. |
+ | [* icon_note] There are two adhesive strips in the center of the phone connecting the rear case to the battery, you'll need to remove them to open the phone. |
+ | [* black] When the edges of the cover are free from adhesive, tilt it to allow access to the battery tabs. |
+ | [* black] Use [product|IF145-020|tweezers] to pull the two black adhesive strips out of the phone but don't pull just yet. |
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。