修理を始めるには コミュニティ ストア

Sostituzione cover posteriore Sony Xperia Z3

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての5個のガイドに反映されます。

ガイドに戻る
英語
イタリア語
次の手順

手順 1を翻訳中

手順1
Sony Xperia Z3 Back Cover Replacement: 手順 0、 3の画像 1 Sony Xperia Z3 Back Cover Replacement: 手順 0、 3の画像 2 Sony Xperia Z3 Back Cover Replacement: 手順 0、 3の画像 3

  • Heat the back cover of your Xperia Z3 to loosen the adhesive underneath.

  • If you use an iOpener, follow these instructions for use.

  • Lift up the back cover with a suction handle and put an opening pick in the gap.

  • Move the pick carefully around the edges to loosen the adhesive on every side of the phone.

  • Don't put the pick in too deep under the back cover to not damage any parts inside the phone.

Scalda la cover posteriore del tuo Xperia Z3 per ammorbidire l'adesivo sottostante.

Tira la cover posteriore con una ventosa e infila un plettro di apertura nella fessura che si è creata.

Muovi il plettro con cautela lungo i bordi per allentare l'adesivo su tutti i lati del telefono.

Non infilare il plettro troppo in profondità sotto la cover posteriore per non danneggiare i componenti all'interno del telefono.

[* black] Heat the back cover of your Xperia Z3 to loosen the adhesive underneath.
+ [* icon_note] If you use an iOpener, follow these [guide|11677|instructions] for use.
[* black] Lift up the back cover with a suction handle and put an opening pick in the gap.
[* black] Move the pick carefully around the edges to loosen the adhesive on every side of the phone.
[* icon_caution] Don't put the pick in too deep under the back cover to not damage any parts inside the phone.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。