メインコンテンツにスキップ

MacBook Unibody Model A1278のロジックボードの交換

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての5個のガイドに反映されます。

英語
日本語

手順 1を翻訳中

手順1
MacBook Unibody Model A1278 Logic Board Replacement: 手順 0、 1の画像 1
  • In the next few steps, you will disconnect the highlighted cables which connect the logic board to the upper case.

  • Each connector is different, so the following steps will show you how disconnect each in detail.

次の手順では、上部ケースにロジックボードを接続している、画像にハイライトされているケーブルの接続を外します。

各コネクタは異なります。そのため、手順に従って、詳細に外し方を確認してください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります