注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての10個のガイドに反映されます。
手順 1を翻訳中
手順1
-
Grab the clear plastic pull tab attached to the battery connector and pull it toward the front edge of the Air to disconnect the battery from the logic board.
| [* black] Grab the clear plastic pull tab attached to the battery connector and pull it toward the front edge of the Air to disconnect the battery from the logic board. | |
| [* icon_caution] Do not lift upward on the connector as you disconnect it. | |
| + | [* icon_reminder] When reinstalling a new battery, it may be helpful to temporarily reconnect the battery before placing it in the frame. Make sure that the connector lays flat to the board. |
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。