メインコンテンツにスキップ

iPod Classicのハードドライブの交換

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての8個のガイドに反映されます。

英語
日本語

手順 15を翻訳中

手順15
iPod Classic Hard Drive Replacement: 手順 0、 1の画像 1
  • Gently begin to disengage the clip from the front panel.

  • It is easy to create a noticeable bump in the rear panel here that is difficult to repair. When prying the tab free, try to have the metal spudger pivot on the edge of the rear panel rather than bending the rear panel outward.

ゆっくりとフロントパネルからクリップを外し始めます。

ここでリアパネル上に目立った凹凸を作ってしまうと修理が難しくなります。タブをこじ開けるときは、リアパネルを外側に曲げるのではなく、金属製のスパッジャーがリアパネルの端を支点になるようにしてください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります