メインコンテンツにスキップ
英語
日本語

手順 4を翻訳中

手順4
Cut the adhesive sticker between the screen and the middle housing. It will be easier if you apply low heat degree less than 85℃. Be careful to avoid breaking touch panel. Carefully flip the housing over and loosen the hidden tabs around the battery slot. Loosen the middle housing and then push the front assembly--this may take a little extra effort.
  • Cut the adhesive sticker between the screen and the middle housing. It will be easier if you apply low heat degree less than 85℃. Be careful to avoid breaking touch panel.

  • Carefully flip the housing over and loosen the hidden tabs around the battery slot.

  • Loosen the middle housing and then push the front assembly--this may take a little extra effort.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります