メインコンテンツにスキップ

Sostituzione gruppo pannello frontale dell'iPhone 6 Plus

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての18個のガイドに反映されます。

英語
イタリア語

手順 14を翻訳中

手順14
iPhone 6 Plus Front Panel Assembly Replacement: 手順 0、 2の画像 1 iPhone 6 Plus Front Panel Assembly Replacement: 手順 0、 2の画像 2
  • Finally, disconnect the digitizer cable connector.

  • When reconnecting the digitizer cable, do not press the center of the connector. Press one end of the connector, then press the opposite end. Pressing in the center of the connector can bend the component and cause digitizer damage.

Infine, stacca il connettore del cavo del digitizer.

Quando ricolleghi il cavo del digitizer, non fare pressione sul centro del connettore. Premi prima da un'estremità e poi dall'altra. Premendo nel centro del connettore potresti piegare il componente e provocare danni al digitizer.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります