メインコンテンツにスキップ

Samsung Galaxy S5のインテリアミッドフレームアセンブリの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 2を翻訳中

手順2
Samsung Galaxy S5 Interior Midframe Assembly Replacement: 手順 0、 1の画像 1
  • Flip the phone over and remove the following screws from the battery side of the midframe:

  • Two 4.4 mm Phillips #000 screws near the USB port on the battery side of the phone

  • One 4.4 mm Phillips #000 screw

デバイス本体を裏返しにして、ミッドフレームのバッテリー側から次のネジを外します。

デバイス本体のバッテリー側にあるUSBポート付近の4.4 mm #000プラスネジー2本

4.4 mm #000プラスネジー1本

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります