メインコンテンツにスキップ

MacBook Unibody Model A1278の光学ドライブの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 8を翻訳中

手順8
MacBook Unibody Model A1278 Optical Drive Replacement: 手順 0、 1の画像 1
  • Lift the optical drive from its right edge and pull it out of the computer.

  • The hard drive cable may become disconnected from the logic board when removing the optical drive. Ensure it is connected during reassembly.

光学ドライバを右側端から持ち上げて、デバイスから引き抜きます。

光学ドライブを取り外した時、ハードドライブケーブルがロジックボードから外れることがあります。 再組み立て時に接続されていることを確認してください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります