メインコンテンツにスキップ

Reemplazo de la placa lógica del iPad Air Wi-Fi

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての8個のガイドに反映されます。

英語
スペイン語

手順 28を翻訳中

手順28
iPad Air Wi-Fi Logic Board Replacement: 手順 0、 2の画像 1 iPad Air Wi-Fi Logic Board Replacement: 手順 0、 2の画像 2
  • Continue to slide the opening pick under the cable, stopping before the cable bends to the Lightning connector.

  • Move slowly and carefully. If the opening pick does not slide easily, apply more heat and try again. If you use excessive force, you will likely slip and sever the Lightning connector cable.

Continúa deslizando púa de apertura debajo del cable, deteniéndote antes de que el cable se doble al conector Lightning.

Muévete despacio y con cuidado. Si la púa de apertura no se desliza fácilmente, aplica más calor e intenta nuevamente. Si utilizas una fuerza excesiva, es probable que resbales y cortes el cable del conector Lightning.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります