メインコンテンツにスキップ

Reemplazo de la placa lógica del iPad Air Wi-Fi

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての8個のガイドに反映されます。

英語
スペイン語

手順 15を翻訳中

手順15
iPad Air Wi-Fi Logic Board Replacement: 手順 0、 3の画像 1 iPad Air Wi-Fi Logic Board Replacement: 手順 0、 3の画像 2 iPad Air Wi-Fi Logic Board Replacement: 手順 0、 3の画像 3
  • Use the flat end of a spudger to disconnect the rear-facing camera connector from the logic board.

  • Pry up only on the connector—not on the socket itself.

  • Fold the rear-facing camera cable out of the way.

Usa el extremo plano de un spudger para desconectar el conector de la cámara que mira hacia atrás de la placa lógica.

Haz palanca solo en el conector, no en el zócalo.

Dobla el cable de la cámara que mira hacia atrás fuera del camino.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります