メインコンテンツにスキップ

iPad Air Wi-Fi LCD屏幕的更换

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての28個のガイドに反映されます。

英語
中国語

手順 4を翻訳中

手順4
iPad Air Wi-Fi LCD Replacement: 手順 0、 3の画像 1 iPad Air Wi-Fi LCD Replacement: 手順 0、 3の画像 2 iPad Air Wi-Fi LCD Replacement: 手順 0、 3の画像 3
  • Remove the single 2.3 mm Phillips screw securing the battery connector to the logic board.

  • To reduce the risk of a short, you can insert a battery blocker or a modified opening pick to disconnect the battery.

  • Be very careful when you isolate the battery using a battery blocker. The battery contacts are easily damaged, resulting in irreversible damage.

  • Slide the battery blocker underneath the battery connector area of the logic board, and leave it in place while you work.

  • If you are having trouble fitting the battery blocker underneath the logic board, you can try using a playing card to disconnect the battery.

卸下将电池连接器固定到主板的 2.3 毫米十字螺丝。

为降低短路风险,你可以 插入电池隔离片或修改后的撬片来断开电池。

使用电池隔离片隔离电池时要非常小心。 电池触点容易损坏,造成不可逆转的损坏。

将电池阻挡器滑到主板的电池接口区域下方,并在工作时将其留在原位。

如果你在主板下方安装电池隔离片时遇到问题,你可以尝试使用扑克牌断开电池连接。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります