メインコンテンツにスキップ

Reemplazo del LCD del iPad Air Wi-Fi

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての28個のガイドに反映されます。

英語
スペイン語

手順 4を翻訳中

手順4
iPad Air Wi-Fi LCD Replacement: 手順 0、 3の画像 1 iPad Air Wi-Fi LCD Replacement: 手順 0、 3の画像 2 iPad Air Wi-Fi LCD Replacement: 手順 0、 3の画像 3
  • Remove the single 2.3 mm Phillips screw securing the battery connector to the logic board.

  • To reduce the risk of a short, you can insert a battery blocker or a modified opening pick to disconnect the battery.

  • Be very careful when you isolate the battery using a battery blocker. The battery contacts are easily damaged, resulting in irreversible damage.

  • Slide the battery blocker underneath the battery connector area of the logic board, and leave it in place while you work.

  • If you are having trouble fitting the battery blocker underneath the logic board, you can try using a playing card to disconnect the battery.

Quita el único tornillo Phillips de 2.3 mm que fija el conector de la batería a la placa lógica.

Para reducir el riesgo de cortocircuito, puedes insertar un bloqueador de batería o una púa de apertura modificada para desconectar la batería.

Se muy cuidadoso cuando aísles la batería usando un bloqueador de batería. Los contactos de la batería pueden ser dañados fácilmente, resultando en daño irreversible.

Desliza el bloqueador de la batería debajo del área del conector de la batería de la placa lógica y déjalo en su lugar mientras trabajas.

Si tienes problemas insertando el bloqueador de batería debajo de la placa lógica, puedes tratar de usar una carta de juego para desconectar la batería.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります