メインコンテンツにスキップ

iPad Wi-Fiのディスプレイアセンブリの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 1を翻訳中

手順1
iPad Wi-Fi Display Assembly Replacement: 手順 0、 3の画像 1 iPad Wi-Fi Display Assembly Replacement: 手順 0、 3の画像 2 iPad Wi-Fi Display Assembly Replacement: 手順 0、 3の画像 3
  • If your display glass is cracked, keep further breakage contained and prevent bodily harm during your repair by taping the glass.

  • Lay overlapping strips of clear packing tape over the iPad's display until the whole face is covered.

  • This will keep glass shards contained and provide structural integrity when prying and lifting the display.

  • Do your best to follow the rest of the guide as described. However, once the glass is broken, it will likely continue to crack as you work, and you may need to use a metal prying tool to scoop the glass out.

  • Wear safety glasses to protect your eyes, and be careful not to damage the LCD screen.

ディスプレイガラスにヒビが入ってしまった場合、さらにヒビが広がってしまったり、怪我をすることがないように、作業中はガラス表面にテープを貼ってください。

iPadディスプレイの上に透明の梱包用テープを貼り付け、ディスプレイ全体が覆われるまで重ねて貼ります。

この作業はヒビ割れたガラスを固定し、ディスプレイをこじ開けた際の構造上の一体性を守る為です。

この手順に書かれた通りに作業を進めるように最善を尽くしてください。しかしながら、ガラスが一度割れてしまうと、作業が進むにつれて広がってしまいます。その場合、ガラスを取り出すためにメタル性の開口ツールが必要になるかもしれません。

保護メガネを必ず装着してください。そしてLCDスクリーンにダメージが入らないようにご注意ください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります