メインコンテンツにスキップ

Vis Pentalobe

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての21個のガイドに反映されます。

英語
フランス語

手順 3を翻訳中

手順3
iPhone 16 Pentalobe Screws Removal, Remove the pentalobe screws: 手順 0、 2の画像 1 iPhone 16 Pentalobe Screws Removal, Remove the pentalobe screws: 手順 0、 2の画像 2
Remove the pentalobe screws
  • Use a P2 pentalobe driver to remove the two 7.7 mm-long screws on either side of the charging port.

Utilisez un tournevis Pentalobe P2 pour retirer les deux vis de 7,7 mm de long de chaque côté du port de charge.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります