メインコンテンツにスキップ

Logic Board Removal

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 6を翻訳中

手順6
Logic Board Removal, Prop up your phone: 手順 0、 3の画像 1 Logic Board Removal, Prop up your phone: 手順 0、 3の画像 2 Logic Board Removal, Prop up your phone: 手順 0、 3の画像 3
Prop up your phone
  • The logic board might fall out of place during this step. Hold it steady, but avoid gripping it by any of the camera lenses or connectors.

  • Apply a suction handle to the left side of the screen with the handle facing down.

  • Prop up the left side of your phone so it stands upright.

  • If you don't have a suction handle, prop up the phone against a sturdy object, such as a heavy box or thick book.

  • Tilt the logic board down and lay it flat, gently guiding the delicate graphite sheet around the cables.

  • Be careful not to touch the thermal pads on the underside of the logic board.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります