手順 2を翻訳中
手順2
Unfasten the microphone
-
Use your tri-point Y000 driver to remove the 1.3 mm screw securing a grounding contact and the microphone.
-
Use your Phillips #000 driver to remove the two screws securing the right side of the microphone:
-
One 1.9 mm screw
-
One 1.3 mm screw
-
Use your standoff driver to remove the 3.2 mm standoff screw securing the top left of the microphone.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。