手順 13を翻訳中
手順13
Remove the logic board
-
Lift the top edge of the logic board and remove it, making sure no cables get snagged on the board.
-
Make sure the interconnect, ultra-wideband, and black antenna cables are out of the way before putting the board into place.
-
Insert the board at a downward angle so the USB‑C port goes into its recess in the bottom of the frame.
-
Lay the top of the board down and push it into its recess.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。