手順 9を翻訳中
手順9
Remove the antenna board
-
Use a spudger to pry the antenna board off the earpiece speaker.
-
Remove the board.
-
Before securing the antenna board to the speaker, make sure the board is oriented so the antenna socket is along the same edge as the cable groove.
-
If your replacement speaker has adhesive pre-installed, remove the plastic liner and press the board into place to secure it with the adhesive.
-
If your replacement speaker doesn't have pre-installed adhesive, use thin double-sided tape such as Tesa Tape to secure the board to the speaker.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。